 |
|
|
|
 |
Innovations Push Back |
|
|
Konstant patented push back system provides selectivity in the horizontal and vertical storage plane while maintaining multiple pallets stored in depth. This flexible system allows a customer to store from 2 to 6 pallets in depth. These systems can be placed back to back allowing for a maximum of 12 pallets deep of storage. A Konstant cart is manufactured with a welded front, middle and rear cross member. The wheels on the carts travel inside an “I” beam rail. This heavy duty system even ties the rails to all the support beams.
Our carts provide full support for the pallet and as well the Konstant Pushback system can provide a safety bar between the rails for the last pallet stored on the rails.
Our versatile system allows for the frames to be arranged in a traditional straight line front to back or a staggered frame pattern. The patented staggered pattern reduces the column load which reduces loading on the floor. It also reduces the capacity required on the support beam thus reducing the height of the beam and increasing the available vertical height.
Manufacturer:
Konstant
Type:
Structural Cart Rack System
Diameter:
2” diameter x 5/8” wide hardened steel wheel
Bearing Type:
Ball Bearing Wheel: Precision ground inner and outer race-ways with eight (8) precision ground and hardened balls uniformly spaced by a steel retaining ring. This keeps the balls from rubbing together and reduces internal friction and wear. Entire assembly is treated with a dry lubricant and rust inhibitor.
Number of Wheels/Rollers per Cart Mechanism:
Four (4)
Method of Attachment of Wheel/Roller:
Bolted with ½” diameter Grade 8 high strength bolt.
Capacity in pounds per each Wheel/Roller:
2200 pounds per wheel.
Warranty:
Two (2) years on material and workmanship.
Remarks:
The Cart Rail slope is 3/16” per foot.
Konstant Height Requirements
2 deep – ½” above the front beam. Overall height including rail is 3 ½”.
3 deep – 2 ¾” above the front beam. Overall height including rail is 5 ¾”.
4 deep – 5 ¼” above the front beam. Overall height including rail is 8 ¼”.
5 deep – 7 5/8” above the front beam. Overall height including rail is 10 5/8”.
6 deep – 10” above the front beam. Overall height including rail is 13”.
|
|
|
Selectivity: Every vertical level pick face can be a different SKU. This properly used system averages an occupancy rate of 80 – 90%.
email: sales@konstant.com
or call (+1) 800-655-7225 This system works with most types of forklifts. Pallet configuration can range from 2 to 12 pallets deep.
Durability: All carts, rails and support structure is produced from structural components. The only mechanical parts in the system are the four wheels per cart.
Inventory Control: F.I.F.O can be achieved when batch lot products.
The fork truck remains in the aisle and does not enter the system.
|
| |
|
|
About Konstant 
